1. Hang bottle apx. 40 inches above
pressing
surface.
(See Bottle Hanging
instruction)
2. Connect the silicone hose to
the
iron and bottle.
3. Empty
demineralizer package into the bottle
and
fill it with tap water only.
4. Tie the electrical cord and
hose together.
5. Plug the iron cord into a
grounded electrical
outlet.
6.
Set the temperature dial on NO. 4 and let
the
iron heat up for ten minutes.
7.
Open the bottle valve and allow the hose to
fill
with water by pressing the steam
switch.
The iron is now ready for
use.
8. When not pressing, place the iron on
the
supplied iron rest.
Do not stand on
its back!
Always unplug the iron
when unattended or not in
use.
